...
At boot, the LED’s will flash an RGB pattern to test the lights. It will then flash each switch mode, followed by the MIDI channel (status pixel is blue in this stage), followed by the firmware version (status pixel is white in this stage).
The Firmware version, Red flashes are the major version, and green the minor.
If you’re in Snapshot mode, at this point it’ll flash green LEDs to let you know it’s in snapshot mode. If not, it’ll light up the switches with their repective footswitch pixel color helping denote the mode.
When the unit is fully powered up and in it’s running state, the status pixel no longer means anything related to footswitch programming. Right now it’ll simply light up Red and stay on, but we’ll be adding things in the future such as it flashing to the tap tempo beat/etc.
To change what each footswitch does:
...