...
At boot, the LED’s will flash an RGB pattern to test the lights. It will then flash each switch mode, followed by the MIDI channel (status pixel is blue in this stage), followed by the firmware version (status pixel is white in this stage).
The Firmware version, Red flashes are the major version, and green the minor.
If you’re in Snapshot mode, at this point it’ll flash green LEDs to let you know it’s in snapshot mode. If not, it’ll light up the switches with their repective footswitch pixel color helping denote the mode.
When the unit is fully powered up and in it’s running state, the status pixel no longer means anything related to footswitch programming. Right now it’ll simply light up Red and stay on, but we’ll be adding things in the future such as it flashing to the tap tempo beat/etc.
To change what each footswitch does:
...
Function | LED Color (Status Pixel / Footswitch Pixel) |
|---|---|
FS4 (Left footswitch default setting) | Red / Red |
FS5 (Middle footswitch default setting) | Red / Green |
Preset Down | Red / Blue |
Preset Up | Red / Purple |
Previous Footswitch Mode | Red / White |
Next Footswitch Mode | Red / Yellow |
Previous Snapshot | Green / Red |
Next Snapshot | Green / Green |
| Green / Blue (Deprecated, Use Snapshot Mode) |
| Green / Purple (Deprecated, Use Snapshot Mode) |
| Green / White (Deprecated, Use Snapshot Mode) |
| Green / Yellow |
Tuner | Blue / Red |
Tap Tempo/Hold-For-Tuner (Right footswitch default setting) | Blue / Blue |
CC 101 Val 0 (every press) | Blue / Purple |
CC 101 Val 0 / Val 127 (toggles every press) | Blue / White |
CC 102 Val 0 (every press) | Blue / Yellow |
CC 102 Val 0 / Val 127 (toggles every press) | Purple / Red |
CC 103 Val 0 (every press) | Purple / Green |
CC 103 Val 0 / Val 127 (toggles every press) | Purple / Blue |
FS7 (HXStomp XL Only) | Purple / Purple |
FS8 (HXStomp XL Only) | Purple / White |
...